UPS devices  > Sendon pinouts
Part# M2501. Should work with RUPS for DOS/Windows software
Signal Name
DB-9 Male
(UPS end)
DB-9 Female
(PC end)
Signal Name
AC Fail 2 8 CTS, connected by R 1k8 to pin 7(RTS)
Batt Low 5 1 DCD, connected by R 1k8 to pin 8 (CTS). Connected by R 1k8 to pin 7(RTS)
Shutdown 6 R=10k, 4 DTR
Common 4,7 3 TxD
9 pin D-SUB male connector layout
9 pin D-SUB male connector
at the UPS
9 pin D-SUB female connector layout
9 pin D-SUB female connector
at the computer
According to 4 reports in our database (3 positive and 1 negative) this pinout should be correct.

Is this pinout
Sendon UPS-500 dumb cable visual pinout:
Sendon UPS-500 dumb cable diagram
click to enlarge
Source(s) of this and additional information: UPS FAQ in russian
This page contain parts under Copyright © 2000-2018 by team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.