ANY BODY HAVE A PINOUT ON THIS POWER SUPPLY? I WANT TO CONVERT IT TO A BENCH SUPPLY SINCE IT HAS A RATING OF 55 AMPS!
These are the hot shoe (i think is what they are called) power supply for the proliant hp servers, any body convert one yet? lots have cobverted the atx but i dont know the pin or color config on these..
HELP
greg
what i guess i need also is a way to convert these to bench supply :)
i will give a power supply to the one who comes up with the schematic or pinout diagram :)
Hi All
I too need pin out on a Server Psu this ones type API-4030-01 also listed Digital p/n 30-43120-02
its got a 12 pin a 24 pin a 20 pin a 4 pin and a 15pin plus a mains iec connector on it
Hi I have just posted a pin out
As I have spent a day trying to find out the pinout of this server PSU
API-4030-01
Digital Pin 30-43120-02
5 volt @52 A
3V47 @ 32A
+5V
+12V
-5V
-12V
With a 24 pin, 20 pin, 12 pin, 15 pin, 4 pin connectors
So I did it myself [:-)
The attached is my findings and only refer to this unit NO Warranty as to any other unit!
There's an article on WikiHow on how to convert a computer PS to a bench supply. Just a bit of help to anybody wanting it...
Quote from: wirecutter on Mar 28, 2008, 21:00
Hi All
I too need pin out on a Server Psu this ones type API-4030-01 also listed Digital p/n 30-43120-02
its got a 12 pin a 24 pin a 20 pin a 4 pin and a 15pin plus a mains iec connector on it
Hi I have just posted a pin out
As I have spent a day trying to find out the pinout of this server PSU
API-4030-01
Digital Pin 30-43120-02
5 volt @52 A
3V47 @ 32A
+5V
+12V
-5V
-12V
With a 24 pin, 20 pin, 12 pin, 15 pin, 4 pin connectors
So I did it myself [:-)
The attached is my findings and only refer to this unit NO Warranty as to any other unit!
I didn't see anything attached, i too am interested in the pinouts for this power supply, seems like a waste to have such a well built supply sitting idle. They sell for 30$ on ebay.
I need this pinout too...
Hey guuuuuuuys i found how to turn on this power supply:
in the middle of the pwrBlade connector there are 24 little pins like this:
- - - - - -
- - - - - -
- - - - - -
- x - - x x
just short circuit "x pins"!!!!
now you have your cool new workbench power supply! :D
Guys, just change the resistance on the output side, corresponding to the output load you plan on the bench.
Or you may check what kind of converter they used, so that you will know which resistor snubber you will have to adjust.
Schneeschuhe (http://www.schneeschuhe-laden.de)
A mi ya me funciona, hay que cortocircuitar dos pines del conector de 15
- - - - X
- - - - X
- - - - -
Son los 2 marcados con la X, es decir el blaco de la esquina con el negro de al lado.