Pinouts.ru talks

English => Interfaces, Pinouts, Cables => Topic started by: omidi2008 on Sep 10, 2010, 16:17

Title: Activate UART MODE in Sony Ericsson K series, W series (12 pin Connector)
Post by: omidi2008 on Sep 10, 2010, 16:17
How to activate the UART MODE in Sony Ericsson mobile phone?
I saw in pinouts.ru that pin5 and pin6 in pinout say that
- pin 5 is DFMS (Data From Mobile Station) / SP_L
- pin 6 is DTMS (Data To Mobile Station) / SP_R
My question is
Is DFMS and DTMS means that is Tx and Rx?
How to switch that pin to use SP_L or UART mode?

In my reference, SP_REF in pin2 connected to Gnd, so the mobile is in SPEAKER OUT mode, not UART mode.


I hope someone can help me about this...
or any comments....


Thanks alot
Title: Re: Activate UART MODE in Sony Ericsson K series, W series (12 pin Connector)
Post by: Jay` on Feb 05, 2011, 00:25
i have a micromax qube x560 .
in the phone setting there is option for UART and into that there are selection for sim card 1 or 2.
but i dont know the meaning for "UART"...
plz anyone tell me what is that and how it works and what it works?????