Amiga video specification users reports and reviews

[Discuss at the forum] [SUBMIT new pinout]

There are 7 approved reports in our database

Date	Content Revision	User opinion	Comment	Approved by moderator?
		CORRECT	Works for me	APPROVED
		INCORRECT	Looking at the Amiga1200 schematic, there are actually two different grounds; the Video ground and the Logic ground. Pins 16, 17 and 18 are wired (together) to the video gound, while pins 13, 19 and 20 are connected to the logic ground. A note of this would be in place, alt. add this info (Video/Logic GND) to each pin description. Thanks for a marvellous site! I use it on a day-to-day basis, both private and proffessionally.	APPROVED
2009-01-04 06:07:50	rev. 1	INCORRECT	Your Amiga video pinout (23 pin connector) should have pin 7=Digital BLUE, pin 9=Digital RED, also pin 14 is called Zero Detect according to my Amiga 500 User Manual. The rest look ok.	APPROVED
2014-02-21 22:22:38	rev. 2	CORRECT		APPROVED
2014-03-27 20:42:28	rev. 2	CORRECT	All ok!	APPROVED
2017-03-07 20:20:04	rev. 2	CORRECT		APPROVED
2019-03-27 12:47:13	rev. 2	CORRECT	seems all correct for A500	APPROVED

History of users contributions

Date	Content Revision	Author	Comment
2015-11-01 16:50:09	rev. 2

Back to Amiga video pinout

Pinouts.ru > Pinout of Amiga video and layout of 23 pin D-SUB male connector

should be correct