|
APC AP9335T NetBotz Temperature Probe specification users reports and reviews |
| Date | Content Revision |
User opinion | Comment | Approved by moderator? |
|---|---|---|---|---|
| 2016-04-06 13:33:36 | rev. 2 | CORRECT | APPROVED | |
| 2016-11-07 23:58:06 | rev. 2 | CORRECT | APPROVED | |
| 2017-04-24 08:10:54 | rev. 2 | CORRECT | uses a 10K Thermistor, got some off Amazon and worked great! | APPROVED |
| 2017-07-21 17:52:31 | rev. 3 | CORRECT | there is also an AP9335TH it contains a temp-sensor and a humidity-sensor pin 1-3 should then have a 1k2 resistor i had no luck finding the pins for humidity sensor | APPROVED |
| 2017-09-30 13:20:27 | rev. 4 | CORRECT | APPROVED | |
| 2017-10-07 19:51:10 | rev. 4 | CORRECT | "Thermistor seems to be B0/50 K=3970" | APPROVED |
| 2018-09-18 09:48:07 | rev. 5 | CORRECT | This is great! | APPROVED |
| 2019-02-17 08:14:27 | rev. 5 | CORRECT | APPROVED | |
| 2019-03-25 12:57:37 | rev. 5 | CORRECT | APPROVED | |
| 2019-07-01 23:01:40 | rev. 5 | CORRECT | APPROVED | |
| 2019-12-08 17:18:37 | rev. 5 | CORRECT | APPROVED | |
| 2020-02-05 20:15:36 | rev. 5 | INCORRECT | Pin 1 is not Vcc. It's GND. Vcc is sitting on pin 6, there are 5 volts. | APPROVED |
| 2020-02-17 19:54:12 | rev. 5 | CORRECT | APPROVED | |
| 2020-09-07 22:30:33 | rev. 5 | CORRECT | no | APPROVED |
| 2020-09-23 00:36:18 | rev. 5 | CORRECT | APPROVED | |
| 2021-02-12 17:00:04 | rev. 5 | CORRECT | APPROVED | |
| 2021-08-11 08:57:56 | rev. 5 | CORRECT | APPROVED | |
| 2021-09-02 19:35:28 | rev. 5 | CORRECT | APPROVED | |
| 2021-11-04 00:30:54 | rev. 5 | CORRECT | APPROVED | |
| 2023-03-01 15:04:08 | rev. 5 | CORRECT | Based on my testing I think the thermistor is more likely a 10k with B=3892K type. | APPROVED |
| 2023-06-29 10:26:16 | rev. 6 | CORRECT | APPROVED | |
| 2023-07-07 23:02:44 | rev. 6 | CORRECT | worked fine | APPROVED |
| 2024-04-09 19:21:20 | rev. 6 | CORRECT | Wiring diagram is correct. Now use the temp sensor with my AP9631. Thermistor NTC MF52 10k works perfect as well. | APPROVED |
| 2024-12-07 04:14:39 | rev. 6 | CORRECT | Can confirm 10K Thermistor Beta is approx 3900K. Found by installing resistors and watching APC Temperature Log 30kOhm = 1.5C, 11.6KOhm = 21.5C, 10kOhm = 25C, 5kOhm = 41.5C | APPROVED |
| Date | Content Revision |
Author | Comment |
|---|---|---|---|
| 2014-11-02 14:03:44 | rev. 2 | makoto | update with values for type_sense line |
| 2017-05-11 19:13:01 | rev. 2 |
Pinouts.ru > Pinout of APC AP9335T NetBotz Temperature Probe |
should be correct |