APC Smart UPS DB9 cable specification users reports and reviews |
Date | Content Revision |
User opinion | Comment | Approved by moderator? |
---|---|---|---|---|
CORRECT | This pinout worked like a champ. I"m using PowerChute Business Edition (free download from APC) on Windows 2003 server with an APC Smart-UPS 2200. | APPROVED | ||
CORRECT | worked :-) | APPROVED | ||
CORRECT | APPROVED | |||
CORRECT | APPROVED | |||
CORRECT | worked for me!received all status info: volts, status, battery % chgrd, etc... | APPROVED | ||
CORRECT | APPROVED | |||
CORRECT | Works perfectly when using a Sun Ultra5 workstation with Solaris 8 and APC PowerChute Business Edition web-based interface. Gives full status of UPS and battery run-time. UPS is connected to /dev/ttyb. | APPROVED | ||
CORRECT | Cable works perfectly using this diagram, a Smart UPS 700 connected to /dev/ttyb, Sun Ultra5, Solaris 8, and APC PowerChute Business Edition web interface. All status and options are viewable/setable. | APPROVED | ||
CORRECT | Great work guys!! Keep on! I owe you one! | APPROVED | ||
CORRECT | APPROVED | |||
CORRECT | APPROVED | |||
CORRECT | correct | APPROVED | ||
CORRECT | Works great with my APC Smart-UPS 1000.. | APPROVED | ||
CORRECT | This is CORRECT; had a SmartUPS 1500 with Network Management Card and no way to reconfigure it without the | APPROVED | ||
CORRECT | Works with Model Back-UPS Pro 650S | APPROVED | ||
CORRECT | Nicely done! Works perfectly both with build-in windows USP management console and APCs PowerChute software. THX a lot... | APPROVED | ||
CORRECT | Very useful! This is one of the few sites on Internet Which has some sense! | APPROVED | ||
CORRECT | the docu is correct, the cable work fine with windows XP SP2 and smart UPS 700 | APPROVED | ||
CORRECT | Just made the cabel based on this pinout. Everything works perfectly. | APPROVED | ||
CORRECT | mere | APPROVED | ||
CORRECT | Works like a charm, Its the official model 940-0024C cable recommended by apcupsd. They suggest it might even work without the DCD-DTR RTS-CTS shorts but that didn`t work for me. http://www.apcupsd.org/manual/Cables.html | APPROVED | ||
CORRECT | APPROVED | |||
CORRECT | completely correct, works for me, for hyperterminal access shorting the DTR pins on the pc side is not necessary. Only connecting the data pins works fine | APPROVED | ||
2008-08-20 21:20:09 | rev. 2 | CORRECT | Works great for APC Smart 620 | APPROVED |
2008-10-07 21:33:16 | rev. 2 | CORRECT | APPROVED | |
2008-10-26 01:04:03 | rev. 2 | CORRECT | APPROVED | |
2009-01-30 18:16:42 | rev. 2 | CORRECT | APPROVED | |
2009-06-08 23:10:33 | rev. 7 | CORRECT | APPROVED | |
2009-08-05 15:13:05 | rev. 7 | CORRECT | Everything is working, tested on SmartUPS 700 with apcupsd | APPROVED |
2009-08-17 20:11:44 | rev. 7 | CORRECT | APPROVED | |
2009-09-11 22:43:38 | rev. 7 | CORRECT | I have tested with multimeter the original cable that came with APC Smart-UPS 750 (SUA750I), and found that all the connections from this document are present: UPS 2 - PC 2, UPS 1 - PC 3, UPS 9 - PC 5, PC 1 - PC 4, PC 7 - PC 8. I also tested the cable (and UPS) with software: built-in UPS service in Windows 2000 and APC Power Chute Plus, and all worked. | APPROVED |
2009-10-21 15:55:53 | rev. 7 | CORRECT | APPROVED | |
2009-11-17 19:40:34 | rev. 7 | CORRECT | APPROVED | |
2010-04-05 17:59:57 | rev. 7 | CORRECT | APPROVED | |
2010-05-20 12:00:25 | rev. 8 | CORRECT | APPROVED | |
2010-05-23 17:24:52 | rev. 8 | CORRECT | APPROVED | |
2010-08-04 00:03:41 | rev. 8 | CORRECT | APPROVED | |
2010-10-11 22:33:22 | rev. 9 | CORRECT | APPROVED | |
2011-10-09 11:49:42 | rev. 13 | INCORRECT | Document contradicts it's own specs. Two diagrams show different wiring, yet they both include 940-0024B as specified cables. I have included these comments in detail in an 'edit' submission form. The shorter table looks correct, and the one with question marks appears to be wrong, or for another cable that I do not know of. Thanks KL from MN, USA PS, the 940-0024 is a serial data cable, RX/TX. The description should delete the words 'power-fail' and 'shut-down', as these are designations for those pins for a different cable (940-0020) with simple signalling, and not serial data, and a different pin usage and a transistor & resistors in the PC end. | APPROVED |
2012-04-16 02:14:25 | rev. 14 | CORRECT | APC smart-ups 700i OK! | APPROVED |
2012-05-11 15:26:25 | rev. 14 | INCORRECT | This documents does not correctly explain the the cabling confihuration for APC Smart-UPS (Specially Smart-UPS 1500 RM). | APPROVED |
2012-05-14 17:01:32 | rev. 14 | CORRECT | APPROVED | |
2012-06-11 01:05:20 | rev. 14 | CORRECT | APPROVED | |
2012-06-20 20:15:03 | rev. 14 | CORRECT | works fine with APC BP-650SI and PowerChute Business Edition v9.0.1 for Windows 7 | APPROVED |
2012-11-29 15:06:29 | rev. 14 | CORRECT | Worked Good with Sua3000rmi2u. | APPROVED |
2014-03-18 19:59:34 | rev. 14 | CORRECT | APPROVED | |
2014-05-07 14:29:20 | rev. 14 | CORRECT | APPROVED | |
2014-07-11 14:01:12 | rev. 14 | CORRECT | APPROVED | |
2014-11-30 10:10:40 | rev. 14 | CORRECT | APPROVED | |
2014-12-13 20:48:17 | rev. 14 | CORRECT | APPROVED | |
2016-02-20 20:27:21 | rev. 14 | CORRECT | APPROVED | |
2016-04-15 18:04:47 | rev. 14 | CORRECT | APPROVED | |
2016-08-12 05:47:42 | rev. 14 | CORRECT | It work perfectly with my two APC SU1000 and Smart-UPS 420. Thank You. | APPROVED |
2016-09-13 17:57:45 | rev. 14 | CORRECT | APPROVED | |
2016-12-21 20:38:54 | rev. 14 | CORRECT | APPROVED | |
2017-02-02 13:59:06 | rev. 14 | CORRECT | APPROVED | |
2017-02-06 13:03:17 | rev. 14 | CORRECT | APPROVED | |
2017-08-09 14:30:15 | rev. 15 | CORRECT | this scheme is OK | APPROVED |
2017-08-23 05:23:23 | rev. 15 | CORRECT | APPROVED | |
2017-09-05 05:14:00 | rev. 15 | CORRECT | This pinout ('simple scheme') matches the pinout of the 940-1524D cable, including shorted pins and connected shells. | APPROVED |
2017-09-10 16:18:24 | rev. 16 | CORRECT | APPROVED | |
2018-10-27 23:11:23 | rev. 16 | CORRECT | APPROVED | |
2019-01-25 05:29:46 | rev. 16 | CORRECT | APPROVED | |
2019-02-12 00:01:16 | rev. 16 | CORRECT | Not that I have seen. Additonal it will be helpfull to note the apc default username and password. Thank you for your data collection. BR Roger | APPROVED |
2019-03-28 21:33:44 | rev. 16 | CORRECT | APPROVED | |
2019-11-07 11:55:49 | rev. 17 | CORRECT | APPROVED | |
2019-12-15 18:42:40 | rev. 17 | CORRECT | O esquema simples (APC 940-1524D cable) funcionou perfeitamente em um APC SURTA1500XL! | APPROVED |
2020-06-06 15:21:50 | rev. 17 | ERROR FIXED | The 9,1,2 pins look OK for the basic mode, but the smart mode seems to need extra components. 4+9=GND 8=25V 7=5V | APPROVED |
2021-02-07 16:07:41 | rev. 17 | CORRECT | Everything is correct for APC RT5000 XLI communication | APPROVED |
2021-04-24 01:51:53 | rev. 17 | CORRECT | no | APPROVED |
2022-06-13 22:13:30 | rev. 17 | CORRECT | APPROVED | |
2023-03-12 23:15:09 | rev. 17 | CORRECT | APPROVED | |
2023-06-14 06:34:28 | rev. 17 | CORRECT | APPROVED |
Date | Content Revision |
Author | Comment |
---|---|---|---|
2009-02-21 22:27:20 | rev. 3 | Juri G. Soloviev | Just "Apcupsd" added to header |
2009-04-01 19:26:41 | rev. 6 | Paul Bungard | Added another part number that will work with these cards. |
2009-05-13 22:13:06 | rev. 7 | Christopher Rowe | Updated part# based on what I have on hand; found the site trying to verify this was the correct cable. Pinouts match exactly. |
2010-04-18 14:28:53 | rev. 8 | David Yuill | The male-female connector shells are also connected. |
2010-08-11 14:40:09 | rev. 8 | Nick | |
2012-01-15 16:01:27 | rev. 13 | I got my information from APC forum and a third party site | |
2012-07-03 17:30:57 | rev. 14 | UPS to Modem for 9pin D-SUB male to 9pin D-SUB male connection diagram | |
2013-02-20 22:47:20 | rev. 14 |
Pinouts.ru > Pinout of APC Smart UPS cable and layout of 9 pin D-SUB male connector and 9 pin D-SUB female connector |
should be correct |