Dell Axim X50, X51 USB Sync and charging cable specification users reports and reviews

[Discuss at the forum] [SUBMIT new pinout]

There are 9 approved reports in our database

Date	Content Revision	User opinion	Comment	Approved by moderator?
		CORRECT	good	APPROVED
		CORRECT		APPROVED
		ERROR FIXED	Pins 1,2,3,4 are for high current + 5 vdc power. Pin 21 is for low current +5 vdc power. At a minimum, pins 15 and 17 are ground. Pins 22 and 23 are for USB data. Here is some information that might help you. http://www.netcrafting.com/computer/pda/x50v_pinout.jpg Thanks	APPROVED
		CORRECT		APPROVED
2010-01-22 21:51:39	rev. 2	CORRECT	i check t the pins 1,2,3,4. 5 not seams to be+ 5v:D but 1,2,3,4 are all together in the same whire :) thks it was helpfull	APPROVED
2011-12-01 15:04:27	rev. 4	INCORRECT	proprietary	APPROVED
2016-04-18 21:37:39	rev. 4	CORRECT		APPROVED
2024-02-22 16:14:24	rev. 5	CORRECT		APPROVED
2024-03-05 13:00:38	rev. 5	CORRECT	TTL uses 3.3 Volt logic!	APPROVED

History of users contributions

Date	Content Revision	Author	Comment

Back to Dell Axim X50, X51 USB Sync and charging cable pinout

Pinouts.ru > Pinout of Dell Axim X50 USB Sync and charging cable and layout of 4 pin USB A or USB B plug connector and 36 pin Dell Axim special connector

should be correct