Dell Inspiron/Latitude TV/Digital Audio Output specification users reports and reviews |
Date | Content Revision |
User opinion | Comment | Approved by moderator? |
---|---|---|---|---|
ERROR FIXED | Correct pinout for dell latitude D series is there: http://support.dell.com/support/edocs/systems/latd510/en/sm/pinouts.htm#wp999820 I"d try to make minidin to composite cable ( only connect pins 6 and 7 to cinch) and works fine on my dell latitude D505 | APPROVED | ||
CORRECT | APPROVED | |||
CORRECT | Checked SPDIF and it works! I didnt check other connections. | APPROVED | ||
CORRECT | Ive got working S-Video on my Dell Inspiron 6400/E1505. | APPROVED | ||
CORRECT | Standard S-Video cable can be used for S-Video output. Tested on Dell Inspiron 6400. | APPROVED | ||
CORRECT | for composite video only,pin 7 is ground,pin 6 is video so is sort of correct for me and my tv! | APPROVED | ||
CORRECT | I was searching for video out from latitude D510 and this is work | APPROVED | ||
INCORRECT | Pin 5 is nn/c or o/c on my Inspiron 1520. Pin 7 is S/PDIF data. To get S/PDIF to work I used gnd from pins 1/2 | APPROVED | ||
CORRECT | I checked on my inspiron 1720 and the layout is changed. So far i only checked the s/pdif output and worked.in the inspiron the pins are rearranged like this, pin 1= pin 1, pin 2 = pin 3, pin 3 = pin 4, pin 4 = pin 6, pin 5 = pin 2, pin 6 = pin 7, pin 7 = pin 5 | APPROVED | ||
2008-08-11 02:25:31 | rev. 2 | CORRECT | Works right with Dell XPS 1530 | APPROVED |
2008-09-03 21:28:36 | rev. 2 | CORRECT | Correct ! Checked on Inspiron 1525 with s/pdif and s-video out. | APPROVED |
2008-10-30 21:29:26 | rev. 2 | CORRECT | APPROVED | |
2009-01-21 14:23:54 | rev. 2 | CORRECT | APPROVED | |
2009-02-19 15:47:06 | rev. 2 | CORRECT | APPROVED | |
2009-11-04 19:02:04 | rev. 6 | CORRECT | But, what pin from mini-din goes to the RCA shell and what goes to the RCA center to get digital audio? Pin 7 to RCA shell and pin 5 to RCA center, or vice-versa? | APPROVED |
2010-02-23 02:47:30 | rev. 6 | CORRECT | APPROVED | |
2010-10-01 16:40:47 | rev. 6 | CORRECT | I tested only S/PDIF on a Dell XPS M1730. My Cable Connects 1,2,5,6 all to ground and 7 to S/PDIF. It works. I hope it doesn't matter i'm short-circuiting the composite signal, which is turned of. | APPROVED |
2012-03-11 09:04:20 | rev. 6 | CORRECT | component video and posite working tried inserting wires into it and connected it to the correct connector,tested on dell inspiron 1420 note do not forget to connect ground if using component else get greenish haze | APPROVED |
2012-03-17 13:21:05 | rev. 6 | INCORRECT | reverse 4 and 6 for component video | APPROVED |
2013-12-16 00:35:52 | rev. 6 | CORRECT | APPROVED | |
2014-02-07 00:15:11 | rev. 7 | CORRECT | APPROVED | |
2015-05-31 20:26:37 | rev. 7 | CORRECT | APPROVED | |
2016-02-14 13:05:12 | rev. 7 | CORRECT | APPROVED |
Date | Content Revision |
Author | Comment |
---|---|---|---|
2009-08-06 22:35:57 | rev. 3 | Jason M | "Name" and "Number" columns were incorrect (reversed), fixed by reversing headers |
2009-08-06 22:36:08 | rev. 4 | Jason M | "Name" and "Number" columns were incorrect (reversed), fixed by reversing headers |
2009-10-12 23:06:45 | rev. 5 | Astruc | |
2014-04-19 22:45:19 | rev. 7 | pin 5 is tied to +3.3v with R 3k3 |
Pinouts.ru > Pinout of Dell Inspiron/Latitude TV/Digital Audio Output and layout of 7 pin mini-DIN female connector |
should be correct |