HP 12/13 pin power supply connector for Vectra VL 5 minitower P-120 etc. specification users reports and reviews

[Discuss at the forum] [SUBMIT new pinout]

There are 15 approved reports in our database

Date	Content Revision	User opinion	Comment	Approved by moderator?
		CORRECT	Correct; verified with a multimeter.	APPROVED
		CORRECT	Works, checked with a dmm with 2 hdds connected.	APPROVED
2009-04-23 22:09:59	rev. 2	CORRECT		APPROVED
2009-12-20 12:29:40	rev. 2	CORRECT	the colors of the wires are correct; for 14-pin HP power supply (for example, made by Delta Electronics, model: DPS-120HB) there is an extra cord: it is grey and it is before the first cord.	APPROVED
2010-08-16 20:34:13	rev. 3	CORRECT		APPROVED
2010-09-10 18:51:03	rev. 3	CORRECT		APPROVED
2011-12-09 00:29:34	rev. 3	CORRECT	there is a grey wire (number 0, first wire)	APPROVED
2012-09-18 21:36:57	rev. 3	CORRECT		APPROVED
2013-12-20 21:05:32	rev. 4	CORRECT		APPROVED
2015-02-15 12:20:51	rev. 4	ERROR FIXED	Code: Connectors PS1A/PS1B: Pin Signal Color ----------------------- 1 Power_Good Grey 2 Key - 3 PS_On Purple 4 GND Black 5 GND Black 6 GND Black 7 +12V Yellow ------------------------ 8 +5VSB Green 9 +5V Red 10 +5V Red 11 +5V Red 12 -12V Blue 13 -5V White Connector PS2: Pin Signal Color ----------------------- 1 +3.3V Brown 1 +3.3V Brown 1 +3.3V Brown 4 GND Black 5 GND Black 6 GND Black	APPROVED
2015-02-19 01:44:09	rev. 4	CORRECT		APPROVED
2016-09-11 04:16:10	rev. 5	CORRECT	The "Description" column is correct. Alternative color coding did not work for me. Thanks.	APPROVED
2017-02-14 02:35:51	rev. 5	CORRECT		APPROVED
2020-09-05 19:09:20	rev. 5	CORRECT		APPROVED
2024-09-18 20:36:36	rev. 5	CORRECT	OK	APPROVED

History of users contributions

Date	Content Revision	Author	Comment
2010-01-14 22:33:41	rev. 3	kirill	for some reason I coud not copy-and-paste the image

Back to HP 12/13 pin power supply connector for Vectra VL 5 minitower P-120 etc. pinout

Pinouts.ru > Pinout of HP 12/13 pin power supply connector for Vectra VL 5 minitower P-120 etc. and layout of connector

should be correct