|
Apple MacBook power connector (MagSafe) specification users reports and reviews |
| Date | Content Revision |
User opinion | Comment | Approved by moderator? |
|---|---|---|---|---|
| 2008-10-11 16:01:48 | rev. 5 | CORRECT | APPROVED | |
| 2009-07-25 19:02:42 | rev. 5 | CORRECT | APPROVED | |
| 2009-10-21 23:56:49 | rev. 5 | CORRECT | APPROVED | |
| 2012-01-18 19:03:38 | rev. 7 | CORRECT | APPROVED | |
| 2012-02-26 00:49:27 | rev. 7 | CORRECT | APPROVED | |
| 2012-02-27 21:19:51 | rev. 7 | CORRECT | APPROVED | |
| 2012-03-05 15:00:05 | rev. 7 | CORRECT | yeahh | APPROVED |
| 2012-03-26 13:33:12 | rev. 7 | CORRECT | APPROVED | |
| 2012-07-17 23:04:00 | rev. 7 | CORRECT | APPROVED | |
| 2012-07-30 23:26:39 | rev. 7 | CORRECT | APPROVED | |
| 2012-08-29 16:42:35 | rev. 7 | CORRECT | APPROVED | |
| 2012-09-07 14:49:23 | rev. 7 | CORRECT | APPROVED | |
| 2012-09-28 17:22:21 | rev. 7 | CORRECT | APPROVED | |
| 2012-10-16 01:22:24 | rev. 7 | CORRECT | APPROVED | |
| 2013-01-29 13:44:32 | rev. 8 | CORRECT | APPROVED | |
| 2013-04-03 18:20:07 | rev. 8 | CORRECT | APPROVED | |
| 2013-05-16 15:42:07 | rev. 8 | CORRECT | APPROVED | |
| 2013-09-24 23:13:34 | rev. 10 | ERROR FIXED | The centre pin (3) does not connect to the LED, it connects to a 1-wire chip inside the connector, which controls the charging voltage and the LED status | APPROVED |
| 2014-04-18 23:16:43 | rev. 10 | CORRECT | APPROVED | |
| 2014-11-25 14:51:53 | rev. 10 | CORRECT | APPROVED | |
| 2015-03-12 07:21:36 | rev. 10 | CORRECT | APPROVED | |
| 2016-06-19 05:13:33 | rev. 10 | CORRECT | APPROVED | |
| 2017-02-02 15:31:43 | rev. 10 | CORRECT | APPROVED | |
| 2017-07-12 14:51:42 | rev. 11 | CORRECT | APPROVED | |
| 2018-06-21 20:30:06 | rev. 11 | CORRECT | APPROVED | |
| 2018-10-07 05:21:23 | rev. 11 | CORRECT | APPROVED | |
| 2018-10-26 18:50:52 | rev. 11 | CORRECT | APPROVED | |
| 2020-02-29 09:09:55 | rev. 11 | CORRECT | APPROVED | |
| 2020-10-24 05:46:05 | rev. 11 | CORRECT | APPROVED | |
| 2021-01-08 16:55:07 | rev. 11 | CORRECT | APPROVED | |
| 2021-05-12 07:38:21 | rev. 11 | CORRECT | APPROVED | |
| 2021-10-25 00:23:05 | rev. 11 | CORRECT | APPROVED |
| Date | Content Revision |
Author | Comment |
|---|---|---|---|
| 2011-01-07 23:37:45 | rev. 5 | Steve Russo | Also from Wikipedia: Measuring with no load will give 6.86 VDC; the full 16.5 V is provided to the proper load. Also, the charge control pin does indeed control the charging of the battery. After replacing my MagSafe adapter with a barrel connector, it no longer charges the battery. |
| 2011-10-04 22:10:44 | rev. 6 | Max | |
| 2012-10-06 21:11:53 | rev. 7 | I have dismounted the plug and it connects trough 3 wires to the adapter, so it can not switch off the adapter. the switch on/off is done by loading the two wires in the cable. | |
| 2013-04-25 22:19:00 | rev. 8 |
Pinouts.ru > Pinout of MacBook power connector (MagSafe) |
should be correct |