|
Motorola A630,A835,A845,A1000, i205,i305,i530,i830,i860,i710,i730,i733,i736,i836,i930, V120,V265,V262,V260,V276,V300,V400,V500,V505,V551,V525,V545,V547, V550,V600,V620,v60t,V60,V60i,V60p,V60s,V66,V70,V710,V800,V80,V950,V980,V975,V1050 cell phones cable connector specification users reports and reviews |
| Date | Content Revision |
User opinion | Comment | Approved by moderator? |
|---|---|---|---|---|
| CORRECT | Rx and Tx pins are correct... I have verified them with an Atmel microcontroller | APPROVED | ||
| CORRECT | tested with mot. t720 read and write OK. V60 ONLY READ (in serial box) with soft victor. Some peoples sayed need dongle for v60 but.... your price is very expend. | APPROVED | ||
| CORRECT | APPROVED | |||
| CORRECT | APPROVED | |||
| CORRECT | APPROVED | |||
| CORRECT | Also works for V265, V262, V260, V266, V276, V710, C341, and E815. Common name for this connector is Motorola CE Bus AFAIK | APPROVED | ||
| INCORRECT | APPROVED | |||
| CORRECT | APPROVED | |||
| INCORRECT | For mot i530, my ground pin is located on pin 17th and not 1. | APPROVED | ||
| CORRECT | Working with T720 as SMS terminal. W/o battery (3.8Vdc from linear stabiliser to battery pins) and soldered connection to back side of interface header. T720 cold started at 38400 baud. Powering thru pin3 w. 5..6Vdc not operated - SIM card not recognised. | APPROVED | ||
| ERROR FIXED | For v600 whith charge, pin 3 and 6 be shorted. USB D+ connect to pin4, USB D- connect to pin5. R=25 KOhm connect to pin1 and pin2. Do not pin 3 and 6 shorted in phone, must be in cable! | APPROVED | ||
| 2010-09-10 03:47:21 | rev. 3 | CORRECT | On my E815, shorting pin 1 and 2 with the 25K resistor causes problems with USB mode (but the phone sucessfully charges). Removing the resistor makes USB mode work again... but the phone will complain with "Unable to charge". If you need to reflash a E815 with a dead battery, shorting 3 to 6 is enough to keep the phone ON during the flash. | APPROVED |
| Date | Content Revision |
Author | Comment |
|---|---|---|---|
| 2010-01-07 14:42:52 | rev. 3 | ||
| 2011-05-02 22:57:08 | rev. 3 |
Pinouts.ru > Pinout of Motorola A630,A835,A845,A1000, i205,i305,i530,i830,i860,i710,i730,i733,i736,i836,i930, V120,V265,V262,V260,V276,V300,V400,V500,V505,V551,V525,V545,V547, V550,V600,V620,v60t,V60,V60i,V60p,V60s,V66,V70,V710,V800,V80,V950,V980,V975,V1050 cell phones cable connector and layout of 17 pin Motorola V60 cell phone special connector |
should be correct |