Hardware pinouts information and cables schemes

OBD-2 ISO 14230-4 (ISO-9141-2, KWP2000) RS-232 cable schematic specification users reports and reviews

[Discuss at the forum] [SUBMIT new pinout]

There are 4 approved reports in our database

Date Content
Revision
User opinion Comment Approved by moderator?
ERROR FIXEDdont put 12v on pin 9APPROVED
CORRECTDB9M connector X1 goes to car ODBII port and supplies +12V to this circuit. Use J1962M to DB9F, Type D Cable (P/N 143301) from www.scantool.net, or build an equivalent.

DB25F connector X2 is RS-232 serial port to connect to PC or laptop. A DB9F could be used here instead, with appropriate pin number changes.
APPROVED
ERROR FIXEDel conector de los vehiculos nissan en especial los tsuru es difrerente y no aplica este productoAPPROVED
2013-02-02 15:08:27rev. 4CORRECTAPPROVED


History of users contributions

Date Content
Revision
Author Comment

Back to OBD-2 ISO 14230-4 (ISO-9141-2, KWP2000) RS-232 cable schematic pinout


Pinouts.ru > Pinout of OBD-2 ISO 14230-4 (ISO-9141-2, KWP2000) RS-232 cable schematic and layout of 16 pin car OBD2 special connector
should be correct