|
PalmOne Treo 650, Treo 700w, 700p, 750v, Tungsten T5, E2, TX, 680, LifeDrive cable connector specification users reports and reviews |
| Date | Content Revision |
User opinion | Comment | Approved by moderator? |
|---|---|---|---|---|
| ERROR FIXED | pin1->16(mic_in) pin2->15 ... pin16->1(VDOCK) | APPROVED | ||
| ERROR FIXED | Sorry I pressed return and the form cut out all the good stuff...Looks like you guys got it all reversed. Heres a link to the Palm developers document to the pinouts of the connector http://forum.palmattitude.org/index.php?act=attachtype=postid=10585 | APPROVED | ||
| ERROR FIXED | I dont think its correct for Palm Tungsten T5. Please check it and make sure that its OK. | APPROVED | ||
| ERROR FIXED | I believe the numbers are wrong on your diagram. I think they should be the other way, pin 1 one the right, pin 18 on the left. http://forum.brighthand.com/showpost.php?p=538797postcount=7 | APPROVED | ||
| ERROR FIXED | APPROVED | |||
| ERROR FIXED | the numbers are backwards 1 is 16 16 is 1 etc | APPROVED | ||
| INCORRECT | yes #ed backwards, but if u look at figure its still acurate, Also this same connector for the Palm Centro. Serial says its 3.3v logic levels not TTL | APPROVED | ||
| INCORRECT | Use VBUS for the usb | APPROVED | ||
| 2009-04-29 06:00:10 | rev. 4 | CORRECT | APPROVED | |
| 2009-10-18 12:59:45 | rev. 6 | CORRECT | no errors. tested, 100% ok. | APPROVED |
| 2010-10-11 16:01:44 | rev. 7 | CORRECT | correct | APPROVED |
| 2012-11-03 20:57:47 | rev. 8 | CORRECT | APPROVED | |
| 2012-11-03 20:58:07 | rev. 8 | CORRECT | APPROVED | |
| 2017-12-19 12:17:59 | rev. 8 | CORRECT | APPROVED | |
| 2021-07-27 00:38:44 | rev. 9 | CORRECT | APPROVED | |
| 2025-03-22 03:01:03 | rev. 9 | CORRECT | APPROVED |
| Date | Content Revision |
Author | Comment |
|---|---|---|---|
| 2008-09-25 22:15:16 | rev. 4 | Louis Lester | |
| 2009-05-13 22:07:40 | rev. 5 | aaron | i tested each usb data pin with a multimeter, it is correct |
| 2009-05-20 20:22:41 | rev. 6 | Igor Grzegorski | Confirmed by experiments and by building my own "docking cable" for Treos and LD. |
| 2009-06-29 22:13:01 | rev. 6 | John McFerren | |
| 2010-01-15 23:04:04 | rev. 7 | nebcat | Something helpful. Most people are buying the phone still... |
| 2010-06-19 22:11:47 | rev. 7 | fabrice | There's only 13 pin on Tungsten E2. |
Pinouts.ru > Pinout of PalmOne Treo 650, Treo 700w, 750v, Tungsten T5, E2, TX, 680, LifeDrive cable connector and layout of 16 pin PalmOne Treo 650 special connector and 4 pin USB A or USB B plug connector |
should be correct |