Hardware pinouts information and cables schemes

Samsung Z220, Z310, Z320i, ZX10, ZX20, ZV40, ZV50 cell phones USB specification users reports and reviews

[Discuss at the forum] [SUBMIT new pinout]

There are 6 approved reports in our database

Date Content
Revision
User opinion Comment Approved by moderator?
ERROR FIXEDThis pinout is right but the image with the pins numbers is wrong.
for example: if the keyboard is up. the pin in the down left is number 1.
n
APPROVED
ERROR FIXEDsorry for the other email but i make a mistake...

if the keyboard is up: the pin 1 is in down right, the pin 2 is in up right... ecc...
in this case the pin 24 is in up left and the pin 23 is in down left.

this is correct ;)

Chuckydihockenheim

p.s. look this:
http://www.gsmhosting.com/vbb/attachment.php?attachmentid=82413d=1161204811
http://www.gsmhosting.com/vbb/attachment.php?attachmentid=70865d=1154508129
APPROVED
ERROR FIXEDIts totaly wrong!!!

check urls:
http://www.gsmhosting.com/vbb/attachment.php?attachmentid=82413d=1161204811
http://www.gsmhosting.com/vbb/attachment.php?attachmentid=70865d=1154508129
APPROVED
ERROR FIXEDhttp://porcylaio.supereva.it/samsung_z320i.gif

this is the correct image.


USB PART:

18 - Vcc
16 - D-
15 - D+
14,8 - GND

COM PART:

6 - TX
7 - RX
8,14 - GND
5,24 - SHORT

THIS IS 100 CORRECT ;)

I hope you can put the image and the schema in your site. tnx

Chuckydihockenheim (ChuckyIT)
APPROVED
2009-02-22 13:33:47rev. 2INCORRECTThe connector is only for samsung 530. For samsung z310 is other. First of all the connector has two noch one is on the side and one is on the other side. See also the reports.APPROVED
2012-04-18 23:35:10rev. 4INCORRECTNot all pins are specified.APPROVED


History of users contributions

Date Content
Revision
Author Comment
2009-02-22 23:35:46rev. 3
2018-03-21 09:14:19rev. 5ppwo

Back to Samsung Z220, Z310, Z320i, ZX10, ZX20, ZV40, ZV50 cell phones USB pinout


Pinouts.ru > Pinout of Samsung Z310, Z320i cell phone and layout of 24 pin Samsung E530 cell phone special connector
may be incorrect