Sony LANC interface specification users reports and reviews

[Discuss at the forum] [SUBMIT new pinout]

There are 6 approved reports in our database

Date	Content Revision	User opinion	Comment	Approved by moderator?
		ERROR FIXED	Connect Pin 3 to GND for 140 ms to just power on, not power off, as it can be read on http://www.boehmel.de/lanc.htm	APPROVED
		ERROR FIXED	Oh, im sorry, you wrote it right, I ment when connecting LANC to gnd then it just powers on...	APPROVED
2009-06-08 03:19:59	rev. 2	INCORRECT	diagram does not match pin chart i.e. diagram shows L/1 are the same pin but the chart indicates R/1	APPROVED
2012-11-19 20:11:24	rev. 2	CORRECT	Should be correct	APPROVED
2013-01-15 01:08:25	rev. 2	CORRECT		APPROVED
2013-01-27 01:44:04	rev. 2	CORRECT	The R and L label on the connector is a bit misleading. I realize it is the typical audio right and left position but R and L show here just confuses the issues. They are, as you show in your chart, +Vdc and LANC. It would have been more clear to use the 3, 2, 1, designations and dropped the R & L. Or replace R, L with A and B.	APPROVED

History of users contributions

Date	Content Revision	Author	Comment
2018-03-15 17:47:07	rev. 3	Rainer	make the pinning more clear for use of 2.5mm jack and minidin

Back to Sony LANC interface pinout

Pinouts.ru > Pinout of Sony LANC interface and layout of 3 pin stereo plug connector and 5 pin mini-din connector

should be correct