|
USB 2.0 cable wiring specification users reports and reviews |
| Date | Content Revision |
User opinion | Comment | Approved by moderator? |
|---|---|---|---|---|
| CORRECT | APPROVED | |||
| INCORRECT | Your pin-out is wrong for the type B USB connector. I have tested an ordinary type A to type B cable, which works on my HP printer. | APPROVED | ||
| CORRECT | APPROVED | |||
| CORRECT | APPROVED | |||
| CORRECT | good | APPROVED | ||
| CORRECT | Is correct - Coverted mini into flat USB - all works perfectly (for use with PC to MP3 player). | APPROVED | ||
| CORRECT | Is most certainly correct. | APPROVED | ||
| INCORRECT | Picture with error. USB A male pins from 1 to 4 and USB A female pins from 1 to 4, but must be from 4 to 1 | APPROVED | ||
| CORRECT | in a pc with multiple USB ports are they just Daisy Chained together without independant siginal buffers isolating devices connected to the computer? | APPROVED | ||
| CORRECT | APPROVED | |||
| CORRECT | lol | APPROVED | ||
| CORRECT | Turn it 180 degree and then you can see that USB picture A is correct. Its fits like a glove. /Albert E | APPROVED | ||
| CORRECT | APPROVED | |||
| 2008-12-11 21:15:18 | rev. 2 | CORRECT | APPROVED | |
| 2008-12-16 23:08:13 | rev. 2 | INCORRECT | i would recommend going to www.usb.org and pull the actual document, the whole issue revolves around how you orient the connectors, looking at the USB 2.0 documentation it clears up some of the issues. (be careful, they are viewing the pins from BEHIND the connector, so you would have to invert them to get a pinout image from the front of the connector. | APPROVED |
| 2008-12-29 18:08:10 | rev. 2 | CORRECT | APPROVED | |
| 2009-02-13 00:45:10 | rev. 2 | CORRECT | APPROVED | |
| 2009-04-24 05:29:06 | rev. 2 | CORRECT | APPROVED | |
| 2009-08-16 03:42:34 | rev. 6 | CORRECT | APPROVED | |
| 2009-11-23 13:14:14 | rev. 6 | INCORRECT | if one side goes 1 2 3 4 pins, when you turn it around, then 5v side goes to gnd and it's all the kaboom... look at the chart :S | APPROVED |
| 2009-12-25 02:26:45 | rev. 6 | CORRECT | APPROVED | |
| 2010-01-12 11:04:35 | rev. 6 | CORRECT | APPROVED | |
| 2010-01-20 15:53:21 | rev. 6 | CORRECT | APPROVED | |
| 2010-01-23 09:02:11 | rev. 6 | CORRECT | APPROVED | |
| 2010-03-10 23:45:41 | rev. 6 | CORRECT | APPROVED | |
| 2010-03-31 18:48:53 | rev. 6 | CORRECT | APPROVED | |
| 2010-04-14 21:40:27 | rev. 6 | CORRECT | APPROVED | |
| 2010-05-12 17:20:49 | rev. 6 | CORRECT | APPROVED | |
| 2010-06-16 18:11:12 | rev. 6 | CORRECT | great information, thank you | APPROVED |
| 2010-07-05 05:53:28 | rev. 6 | CORRECT | APPROVED | |
| 2010-08-09 08:15:52 | rev. 7 | CORRECT | no errors at all, this was spot on | APPROVED |
| 2010-10-16 23:53:44 | rev. 8 | CORRECT | Correct | APPROVED |
| 2010-11-02 15:46:46 | rev. 9 | CORRECT | APPROVED | |
| 2011-08-29 19:56:41 | rev. 9 | CORRECT | APPROVED | |
| 2011-09-23 19:42:32 | rev. 9 | CORRECT | APPROVED | |
| 2011-12-07 17:11:08 | rev. 9 | CORRECT | APPROVED | |
| 2011-12-23 04:56:21 | rev. 9 | CORRECT | APPROVED | |
| 2012-02-29 00:51:57 | rev. 9 | CORRECT | no errors | APPROVED |
| 2012-03-26 12:55:47 | rev. 9 | CORRECT | APPROVED | |
| 2012-03-30 17:38:44 | rev. 9 | CORRECT | APPROVED | |
| 2012-04-22 23:11:39 | rev. 9 | CORRECT | APPROVED | |
| 2012-05-04 12:31:06 | rev. 9 | CORRECT | APPROVED | |
| 2012-07-03 17:34:04 | rev. 9 | CORRECT | APPROVED | |
| 2012-07-23 19:13:38 | rev. 9 | CORRECT | No errors | APPROVED |
| 2012-08-01 06:01:43 | rev. 9 | CORRECT | APPROVED | |
| 2012-08-16 21:20:26 | rev. 9 | CORRECT | APPROVED | |
| 2012-08-31 15:10:20 | rev. 9 | ERROR FIXED | MINI-A/MINI-B: pin signed 'x' - is USBOTGID pin (OTG ID). 'x' shorted to GND for host mode, N/C for device mode. (Like Micro-A/B) | APPROVED |
| 2012-10-23 22:18:01 | rev. 10 | CORRECT | APPROVED | |
| 2012-11-14 18:41:35 | rev. 10 | CORRECT | APPROVED | |
| 2012-11-23 13:12:56 | rev. 10 | CORRECT | no | APPROVED |
| 2012-11-29 15:17:47 | rev. 10 | CORRECT | APPROVED | |
| 2013-06-08 12:50:03 | rev. 10 | INCORRECT | for mini in schema 1 to 4 2 to x etc, +5v on gnd problem | APPROVED |
| 2013-10-11 17:50:22 | rev. 11 | ERROR FIXED | pin numbers of mini/micro connectors are wrongly annotated. 123x4 12345 You may want to check with USB specs: www.usb.org/developers/documents/... | APPROVED |
| 2014-01-24 14:47:35 | rev. 11 | CORRECT | APPROVED | |
| 2015-01-04 23:21:40 | rev. 11 | CORRECT | APPROVED | |
| 2015-03-14 01:13:18 | rev. 11 | CORRECT | APPROVED | |
| 2015-04-09 19:26:14 | rev. 11 | CORRECT | APPROVED | |
| 2015-11-28 04:52:52 | rev. 11 | CORRECT | correct | APPROVED |
| 2016-01-06 19:01:44 | rev. 11 | CORRECT | APPROVED | |
| 2016-02-25 19:18:20 | rev. 11 | CORRECT | APPROVED | |
| 2016-06-20 14:13:26 | rev. 11 | CORRECT | APPROVED | |
| 2018-02-08 04:56:29 | rev. 12 | CORRECT | APPROVED | |
| 2019-01-30 09:19:46 | rev. 13 | CORRECT | Would be more easily understood if both photos had the same plug orientation | APPROVED |
| 2019-02-13 03:35:45 | rev. 13 | CORRECT | APPROVED | |
| 2023-01-17 11:42:40 | rev. 14 | CORRECT | APPROVED |
| Date | Content Revision |
Author | Comment |
|---|---|---|---|
| 2008-10-20 10:35:41 | rev. 2 | ||
| 2008-11-27 22:24:00 | rev. 2 | ||
| 2009-06-20 12:40:44 | rev. 3 | Mike | |
| 2009-07-10 09:59:52 | rev. 6 | ||
| 2009-12-22 21:21:39 | rev. 6 | ||
| 2010-05-10 21:34:43 | rev. 6 | SERJnCo | |
| 2010-06-19 22:03:44 | rev. 6 | Михаил | |
| 2010-07-25 12:46:17 | rev. 7 | bob@aol.com | Great article |
| 2010-08-23 21:26:48 | rev. 7 | Aluminum spelled incorrectly :( sad very sad | |
| 2011-03-23 14:32:40 | rev. 9 | Pandr | |
| 2013-12-15 21:03:25 | rev. 11 |
Pinouts.ru > Pinout of USB cable schematic and layout of 4 pin USB A / USB B / mini-USB jack connector and 4 pin USB A or USB B plug connector |
should be correct |