Pinouts >  Распиновки разъемов винчестеров других устройств хранения информации
The SFF-8087 connector is widely used on SAS cards. It carries four SATA/ SAS connections providing up to 12gbps of throughput using SAS or SATA II 3.0gbps devices.

The Mini SAS 4i receptacle connector is the right angle connector defined in SFF-8087 with
the 36 circuit size defined in SFF-8086.
 

Pin
function
Side B
Pin
Side A
Pin
Pin
function
GND B1 A1   GND
Tx0+ B2 A2   Rx0+
Tx0- B3 A3   Rx0-
GND B4 A4   GND
Tx1+ B5 A5   Rx1+
Tx1- B6 A6   Rx1-
GND B7 A7  GND 
Sideband 0 B8 A8   Sideband 6
Sideband 1 B9 A9   Sideband 3
Sideband 2 B10 A10   Sideband 4
Sideband 7 B11 A11   Sideband 5
GND B12 A12  GND 
Tx2+ B13 A13   Rx2+
Tx2- B14 A14   Rx2-
GND B15 A15   GND
Tx3+ B16 A16   Rx3+
Tx3- B17 A17   Rx3-
GND B18 A18   GND

 

The use of the sideband signals by a controller is vendor-specific. One implementation of the sideband signals by a controller is an SGPIO initiator interface (see SFF-8485). Other  implementations shall be compatible with the signal levels defined in SFF-8485.
 

36 pin Mini-SAS SFF-8087 internal plug схематический вид разъема
Разъем 36 pin Mini-SAS SFF-8087 internal plug
at the cable
На эту распиновку нет ни одного отзыва! Если вы знаете, правильная она или нет, - нажмите на соответствующую кнопку ниже.

Эта распиновка
This page contain parts under Copyright © 2000-2019 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to Pinouts.ru . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.