Pinouts >  Распиновки разъемов винчестеров других устройств хранения информации
16 pin (7+9) SATA micro connector layout
Разъем 16 pin (7+9) SATA micro
at the storage device

The micro SATA connector (sometimes called uSATA or μSATA) defined by SATA 2.6 specification, and is intended for 1.8-inch (46 mm) hard disk drives. The micro data connector is slightly thinner than the standard  SATA data connector.

SATA micro pinout diagram

Pin Name Function
A1 GND Ground
A2 A+ Transmit+
A3 A- Transmit-
A4 GND Ground
A5 B- Receive-
A6 B+ Receive+
A7 GND Ground
B1 +3.3V 3.3V Power
B2 +3.3V 3.3V Power
B3 GND Ground
B4 GND Ground
B5 +5V 5V Power
B6 +5V 5V Power
B7   Reserved
B8   Vendor specific
B9   Vendor specific
Статус распиновки: +3 -0
На распиновку SATA micro connector есть 3 отзыв(а): 3 положительных и 0 отрицательных.

Эта распиновка
Нет DIY устройств
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings