Pinouts >  Распиновки кабелей и переходников для клавиатур, мышей и т.д.
4 pin USB A plug connector layout
Разъем 4 pin USB A plug
at the USB cable
Connecting USB-mouse to PS/2 connector of computer. It works only with device which supports both interfaces (USB & PS/2).
USB Pin
Name		 USB Pin
Number		 Direction Usb Color PS/2 mouse controller Pin
Number		 PS/2 mouse controller Pin
Name		 Description PS/2 Color
VDC +5V 1 <--- Red 4 VDC +5V   Red
Data- 2 <--> White 1 Data   White
Data+ 3 ---> Green 5 Clock   Brown
Ground 4 ---- Black 3 Ground   Black

Very nice to have one more empty USB connector :).

It's good practice to pull up data/clock lines with some resistors of 10k or so. Especially when connecting to newer motherboards. In some cases signal has levels between 1.5 and 2.5 volts, and mouse don't work. Pulling up helps in that situations and doesn't harm if unnecessary.

 

6 pin mini-DIN male (PS/2 STYLE) connector layout
Разъем 6 pin mini-DIN male (PS/2 STYLE)
at the PS/2 mouse cable
Статус распиновки: +45 -2
На распиновку USB to PS/2 mouse or keyboard adapter есть 51 отзыв(а): 45 положительных и 2 отрицательных.

Эта распиновка
2 сопутствующих распиновок
Нет DIY устройств
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings