Распиновка Power over Ethernet (POEU) Ubisysco - IV Generation

• Задать вопрос
• Comment
• Редактировать
• добавить новую

Power over Ethernet Ubiquitous is a technology that allows Ubiquitous PCB's and Cables to receive power, in addition the technology incorporates GND_LED to every Ubiquitous device, and 2 sending and 2 receiving line level audio inputs/outouts over the existing CAT-5 Ethernet infrastructure. NOT COMPATIBLE With IEEE 802.3af standard. Connector is RJ54 8P8P, however cable is flat 8 Core Modular Cable illustrated below.

Pin Number	Pin Name	Description
1	12V_SYS	Low power 12V@1.0AMP channel providing baseline 12V supply for Audio, Microchip, Ubiquious PCB's
2	GND	Baseline Ground current for Ubiquious PCB's
3	5V_SYS	Low power 5V@2.0AMP channel providing baseline 5V current for Microchip, NRF, Serial, Ubiquious PCB's
4	GND_LED	Sense based trigger channel, connecting a GND signal to external LED, Soundbanks, and other mutable Ubiquious PCB's
5	AV1	Inject/Extract : Left line level Channel Master Smartphone or audio generator
6	AV3	Inject/Extract: Left line level Channel Master Amplifier or VU Processor audio signal
7	AV2	Inject/Extract: Right line level Channel Master Smartphone or audio generator
8	AV4	Inject/Extract: Right line level Channel Master Amplifier or VU Processor audio signal

Power over Ethernet (POEU) Ubisysco Pinout - IV Generation

There may be an error in  PIN 2 description. It may be low power 5V@2.0AMP channel providing baseline 5V supply for Microchip, NRF, Serial, Ubiquious PCB's

Cable : Flat 8 Core Modular Cable 3mm x 8mm

• PVC Jacket
• 28AWG multi-stranded modular cable
• Available in Ivory