Pinouts >  Распиновки последовательных портов

неизвестный разъем
TIA/EIA-562 is a very similar to TIA/EIA-232-F with data rates up to 64 kbps supported.

TIA/EIA-562 is an electrical only standard. It"s not complete standard and intended to be referenced by complete standards, such as TIA/EIA-561. No pinout available. TIA/EIA-562 standard defines an unbalanced, unidirectional, point-to-point interface, with support of inter-operability with TIA/EIA-232-F devices.

Driver Loaded Output Voltage (Min. Level) ≥ | 3.3V |
Driver Open Circuit Output Voltage ≤ | 13.2V |
Driver Loaded Output Voltage (3 kΩ) ≥ | 3.7V |
Driver Short Circuit Current ≤ | 60 mA |
Driver Transition Time Controlled
Maximum Driver Slew Rate ≤ 30 V/μs
Driver Output Resistance (Power Off) ≥ 300Ω
Receiver Input Resistance 3 kΩ to 7 kΩ
Maximum Receiver Input Voltage ?25V
Receiver Thresholds ?3V

Статус распиновки: +0 -0
На эту распиновку нет ни одного отзыва! Если вы знаете, правильная она или нет, - нажмите на соответствующую кнопку ниже.

Эта распиновка
Нет DIY устройств
Источник(и) этой и дополнительной информации: "Summary of Well Known Interface standards" by National Semiconductor
Copyright © 2000-2024 by pinouts.ru team, except user uploaded images.
No portion of this webpage may be reproduced in any form without visible link to pinouts.ru .
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
Change privacy settings