VGA, DVI, S-Video and other video connectors  > SGI pinouts

Silicon Graphics manufacturers high end computers that are used in graphic rendering and CAD/CAM applications. This computer generally operates at two different frequencies (48 kHz and 64 kHz), which is determined upon boot up. This computer type outputs sync RsGsBs, RGsB, RGBS and RGBHV.

Normal Monitor

Pin Description
1Monitor ID Bit 3, TTL
2Monitor ID Bit 0, TTL
3Composite Sync (Active Low), TTL
4Horizontal Drive (Active High), TTL
5Vertical Drive (Active High), TTL
6Monitor ID Bit 1, TTL
7Monitor ID Bit 2, TTL
8Digital Ground
9Digital Ground
10Sync Ground

DDC Monitor

Pin Description
1Data Clock (SCL)
2Bi-directional Data (SDA)
3Composite Sync
4Horizontal Sync
5Vertical Sync
6DDC (+5VInput)
7DDC Ground
8Chassis Ground
9Chassis Ground
10Chassis Ground
13 pin 13W3 female connector layout
13 pin 13W3 female connector
at the computer
According to 1 reports in our database (1 positive and 0 negative) this pinout should be correct.

Is this pinout
SGI video visual pinout:
SGI video diagram
click to enlarge
Source(s) of this and additional information: SGI Octane Workstation Owner"s GuideTechnik-Tipps at AV Invest, from Hardware Book
This page contain parts under Copyright © 2000-2018 by team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to . Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.