Recent posts

#61

Errors and updates / Re: Calcomp model 34480 with 1...

Last post by admin - May 14, 2019, 10:35

I was comparing a 18365-3's damaged cable (from a GTCO Calcomp DrawingBoard model 34480) with the pinout in your web, but it's different in these pins

25 pin D-SUB female connector -----> 8 pin DIN male connector
6 ---> 4
8 ---> 3
21 ---> 4

The shield, from 8 pin DIN, its connected with his pin number 2, and both with the pin 7 (from the 25 pin D-SUB female connector). This is the strangest thing. But it's works!!

I must make another cable, this it's damaged near the 8 pin DIN connector and its pin number 4 is broken, so, sometimes doesn't work.

Changes to the pinout are made.

#62

Errors and updates / Re: Calcomp model 34480 with 1...

Last post by LordZedd - May 07, 2019, 23:08

Today I tested the new cable, its works!!

I hope this helps you.

#63

Errors and updates / Calcomp model 34480 with 18365...

Last post by LordZedd - May 06, 2019, 23:56

I was comparing a 18365-3's damaged cable (from a GTCO Calcomp DrawingBoard model 34480) with the pinout in your web, but it's different in these pins

25 pin D-SUB female connector -----> 8 pin DIN male connector
6 ---> 4
8 ---> 3
21 ---> 4

The shield, from 8 pin DIN, its connected with his pin number 2, and both with the pin 7 (from the 25 pin D-SUB female connector). This is the strangest thing. But it's works!!

I must make another cable, this it's damaged near the 8 pin DIN connector and its pin number 4 is broken, so, sometimes doesn't work.

#64

Interfaces, Pinouts, Cables / Re: From old Nokia to new Huaw...

Last post by Tyler - May 01, 2019, 18:29

Good morning to all.... ;)  ;)  ;)
I have a Volvo car with a hands-free system that works with a Nokia 6510. Now I would like to make it work with a Huawei P20. I looked a lot on the PINOUTS website but I could not quite figure out how to adapt the links. Can you help me? thanks a lot!!!!

I'd like to help.

Tell me what model Volvo. And if you could provide and pictures / numbers on the equipment that would be helpful as well.

#65

Interfaces, Pinouts, Cables / Lenovo l08l6y02 Battery (G550 ...

Last post by Tyler - May 01, 2019, 18:27

Greetings.

Im not sure how active this forum is now, but this used to be a great site (still is an excellent resource).
I need to know the wires leading to the pinouts for a Lenovo G550 battery pack, its model number is l08l6y02.


Thanks in Advance.

#66

Interfaces, Pinouts, Cables / Lenovo ATX Connectors

Last post by Germini - Mar 25, 2019, 20:08

Hello, I would like to ask for an update to the ATX power connectors

There is no section for Lenovo brand on this page: http://pinouts.ru/Power/

So I would start sharing a Lenovo 10-pin ATX Connector based on a Lenovo IQ1X0MS


Please share more lenovo ATX Power connectors to complete the section

#67

Interfaces, Pinouts, Cables / Re: Sonim XP 3410 3.5mm 4 pin ...

Last post by emerysteele - Feb 09, 2019, 08:43

I have a Sonim XP1520 on hand & just tested the pinout with a multi-meter.
The Sonim XP1520 & XP3400 use the same charger. So I assume the XP3410 would be the same as well. But you may want to double check that with Sonim.

Anyways the pinout for the XP1520 is:
Tip (1): Data +
Ring (2): Data -
Ring (3): GND
Sleeve (4): VCC

Similar to an iPod Shuffle cable but with the data lines flipped.

#68

Interfaces, Pinouts, Cables / Sonim XP 3410 3.5mm 4 pin Char...

Last post by BenJ805 - Feb 08, 2019, 01:28

I've looked everywhere online, I even called Sonim and asked them directly. Still can't come up with a pinout for the 3.5mm 4 pin to USB-A wire.

It's similar to this one listed, but I  have no idea if it uses a standard or is custom.

http://connector.pinoutguide.com/4_pin_3.5mm_2.5mm_plug/

#69

Interfaces, Pinouts, Cables / Tripp Lite Omni Pro 450 serial...

Last post by Aristarco - Jan 30, 2019, 20:05

According to the Omni Pro 450 (675) cable pinout, there's a diode going from pin 7 at the female DB9 (PC side) to pin 2 of male DB9 (UPS side). Is the anode connected to pin 7 and cathode to pin 2? Or vice versa?

Thank you in advance!

#70

Interfaces, Pinouts, Cables / FEB 2001 Hyundai Elantra

Last post by SmilyLex - Jan 17, 2019, 11:52

Hi

I have a Hyundai Feb 2001 Build Elantra.

The ODBII socket has the following metal connectors.

1 = -
2 = -
3 = -
4 = Y
5 = Y
6 = -
7 = Y
8 = Y

9 = -
10 = -
11 = -
12 = Y
13 = -
14 = Y
15 = -
16 = Y.

Can anyone tell me which protocol should this stands for.
and which code reader would read it.

Cheers
Alex