May 20, 2019, 18:47

Recent posts

Pages 1 2 3 4 ... 10
I have a Sonim XP1520 on hand & just tested the pinout with a multi-meter.
The Sonim XP1520 & XP3400 use the same charger. So I assume the XP3410 would be the same as well. But you may want to double check that with Sonim.

Anyways the pinout for the XP1520 is:
Tip (1): Data +
Ring (2): Data -
Ring (3): GND
Sleeve (4): VCC

Similar to an iPod Shuffle cable but with the data lines flipped.
I've looked everywhere online, I even called Sonim and asked them directly. Still can't come up with a pinout for the 3.5mm 4 pin to USB-A wire.

It's similar to this one listed, but I  have no idea if it uses a standard or is custom.
According to the Omni Pro 450 (675) cable pinout, there's a diode going from pin 7 at the female DB9 (PC side) to pin 2 of male DB9 (UPS side). Is the anode connected to pin 7 and cathode to pin 2? Or vice versa?

Thank you in advance!
Interfaces, Pinouts, Cables / FEB 2001 Hyundai Elantra
Last post by SmilyLex - Jan 17, 2019, 14:52

I have a Hyundai Feb 2001 Build Elantra.

The ODBII socket has the following metal connectors.

1 = -
2 = -
3 = -
4 = Y
5 = Y
6 = -
7 = Y
8 = Y

9 = -
10 = -
11 = -
12 = Y
13 = -
14 = Y
15 = -
16 = Y.

Can anyone tell me which protocol should this stands for.
and which code reader would read it.

Good morning to all.... ;)  ;)  ;)
I have a Volvo car with a hands-free system that works with a Nokia 6510. Now I would like to make it work with a Huawei P20. I looked a lot on the PINOUTS website but I could not quite figure out how to adapt the links. Can you help me? thanks a lot!!!!
Interfaces, Pinouts, Cables / 2012 Audi A5 Wire colors
Last post by pete0621 - Dec 27, 2018, 04:58
Best to everyone. My daughter got a great deal on a 2012 Audi A5 but it appears some clown has pulled wires out of the OBDII port. Would appreciate any information on which wire colors go to which of the 16 positions on the connector. Also if anyone has a used port available with wires attached I believe my best option will be to cut the old one and splice wires to the new one.
I saw that page.  The Ask Impression A6+ Projector pinout seems similar, though my cable has two composite video and no S-Video.  I'm hoping somebody on the forum may have seen this cable in use on a specific piece of equipment.  Thanks.
I am trying to find out what interface this cable is used for.

It consists of a DB-26HD (HD26) Male to:

  • VGA/SVGA D-Sub Male (HD-15M)
  • VGA/SVGA D-Sub Female (HD-15F)
  • RCA Female Yellow (labeled VID-1)
  • RCA Female Yellow (labeled VID-2)
  • RCA Female White (labeled AUD-L)
  • RCA Female Red (labeled AUD-R)

Any help would be appreciated.  Thank you.

Hello I would like to contact David Knoll contributor of this page
He wrote:
QuoteI'm intending to build a PS/2 keyboard adapter using an ATtiny and a bunch of 74LS374's, as my keyboard was busted when I got it (eBay bargain).

I have a non working Osborne 1 keyboard so he could help me.
Pages 1 2 3 4 ... 10