Кабель локальной сети — конструкция из одного или нескольких изолированных друг от друга проводников (жил), или оптических волокон, заключённых в оболочку. Кроме жил и изоляции, кабель может содержать экран, сердечник, заполнитель, стальную или проволочную броню, металлическую оболочку, внешнюю оболочку.

Skip to / Cisco pinouts
  • 8 pin RJ45 (8P8C) male
    Кросс кабель локальной сети Ethernet This cable can be used to connect two computers together without a hub, or to connect two hubs together (without using an uplink port). If you are connecting two hubs together and one of them has an uplink port, use a straight cable. Most hubs nowadays are autosensing.
  • 8 pin RJ45 (8P8C) female
    Ethernet 10 / 100 / 1000 Mbit RJ45 wiring diagram and cable This is most common cable for 10/100/1000Base-T ethernet networks. This cable will work with 10Base-T (10 Mbit ethernet), 100Base-TX (100 Mbit ethernet) and 1000Base-T (1 Gbit ethernet). It is used to wire a network interface card to a hub, switch or network outlet. This cable is called wipe, patch cord, straight-thru cable.
  • 8 pin RJ45 (8P8C) male
    Ethernet 10 / 100 Mbit (cat 5) network cable wiring This is most common cable for 10/100Base-T ethernet networks. This cable will work with both 10Base-T (10 Mbit ethernet) and 100Base-TX (100 Mbit ethernet) and is used to connect a network interface card to a hub or network outlet. These cables are sometimes called wipes.
  • 8 pin RJ45 (8P8C) male
    Ethernet 10Base-T crossover cable This cable can be used to cascade hubs, or for connecting two Ethernet stations back-to-back without a hub. It works with both 10Base-T and 100Base-TX
  • 8 pin RJ45 (8P8C) male
    Ethernet 1Gb crossover cable 1Gb Ethernet is auto sensing, so crossover usually not needed

Распиновки для Cisco


 
Copyright © 2000-2015 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to Pinouts.ru