Различные электронные устройства и компоненты, не включенные в другие разделы.

Распиновки для * / 3Com / ADC / Adtran / ADVA / Alesis / Allen Bradley / Allied Telesyn / Arduino / ATEN / Avocent / AZ Instruments / Bayer / Baytech / Cellebrite / Cisco / Citizen / Comcom / Crypton / Danfoss / Dell / DeltaOhm / Device / Digi / DSC / Epson / Futaba / Heidenhain / HP / Imax / Intel / Inter-M / iRobot / LPC / LSC / Microchip / NetApp / Netbotz / Netscreen / Nortel / Olimex / Omron / Panasonic / Pico Allen / Planck / Rokenbok / Simatic / Telemann / Toa / Welch or follow to 9 OLD hardware pinouts.

Распиновки для 3Com

Распиновки для ADC

Распиновки для Adtran

Распиновки для ADVA

Распиновки для Alesis

Распиновки для Allen Bradley

Распиновки для Allied Telesyn

Распиновки для Arduino

  • Arduino Esplora The Esplora differs from all preceding Arduino boards in that it provides a number of built-in, ready-to-use set of onboard sensors for interaction. It's designed for people who want to get up and running with Arduino without having to learn about the electronics first.
  • Arduino Ethernet The Arduino Ethernet is a microcontroller board based on the ATmega328. The Ethernet differs from other boards in that it does not have an onboard USB-to-serial driver chip, but has a Wiznet Ethernet interface. This is the same interface found on the Ethernet shield.
  • Arduino FIO The Arduino Fio is intended for wireless applications. The user can upload sketches with an a FTDI cable or Sparkfun breakout board.
  • Arduino Fishino UNO Fishino UNO is based on Arduino platform
  • Arduino Micro The Arduino Micro is a microcontroller board based on the ATmega32u4, developed in conjunction with Adafruit.
  • Arduino Mini The Arduino Mini is a small microcontroller board originally based on the ATmega168, but now supplied with the 328, intended for use on breadboards and when space is at a premium. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, and a 16 MHz crystal oscillator. It can be programmed with the USB Serial adapter or other USB or RS232 to TTL serial adapter.

Распиновки для ATEN

Распиновки для Avocent

Распиновки для AZ Instruments

Распиновки для Bayer

Распиновки для Baytech

Распиновки для Cellebrite

Распиновки для Cisco

Распиновки для Citizen

Распиновки для Comcom

Распиновки для Crypton

Распиновки для Danfoss

Распиновки для Dell

Распиновки для DeltaOhm

Распиновки для Device

Распиновки для Digi

Распиновки для DSC

Распиновки для Epson

Распиновки для Futaba

Распиновки для Heidenhain

  • 15 pin D-SUB female connector drawing15 pin highdensity D-SUB male connector drawing
    Heidenhain TNC 407 / 415 / 425 LCD connection used to connect LCD monitor to Heidenhain TNC 407 / 415 / 425 at the pole X43 in replacement of old Screen VDU (BC 110) You can and should connect all GND together i both ends. The shield for RGB could also be connected but I have not tried yet to do that.

Распиновки для HP

Распиновки для Imax

Распиновки для Intel

Распиновки для Inter-M

Распиновки для iRobot

  • 7 pin mini-DIN female (key in the center) connector drawing
    iRobot Roomba serial port The Roomba Open Interface (OI) is a software interface for controlling and manipulating Roomba?s behavior. The software interface lets you manipulate Roomba?s behavior and read its sensors through a series of commands, including mode commands, actuator commands, song commands, and sensor commands that you send to the Roomba?s serial port by way of a PC or microcontroller that is connected to the Mini-DIN connector.

Распиновки для LPC

Распиновки для LSC

Распиновки для Microchip

Распиновки для NetApp

Распиновки для Netbotz

Распиновки для Netscreen

Распиновки для Nortel

Распиновки для Olimex

  • 10 pin IDC keyed male connector drawing
    Universal EXTension (UEXT) connector This connector includes power and three serial buses: Asynchronous, I2C, and SPI. The connector layout was specified by Olimex Ltd and declared an open-project.

Распиновки для Omron

  • 10 pin Alcatel E801 cell phone proprietary connector drawing9 pin D-SUB female connector drawing
    Omron PLC to RS-232 calbe Omron PLC's Periherial connector to PC RS-232 cable Offical cable names: CQM1-CIF02 or CS1W-CN226

Распиновки для Panasonic

Распиновки для Pico Allen

Распиновки для Planck

Распиновки для Rokenbok

Распиновки для Simatic

Распиновки для Telemann

Распиновки для Toa

Распиновки для Welch


 
Copyright © 2000-2024 by pinouts.ru team.
No portion of this webpage may be reproduced in any form without providing visible HTML link to Pinouts.ru